A simple gesture-controlled interactive table light, which can encourage kids towards making.
Project tutorial by Random Stuff We Make!
In this project text is transmitted between two arduinos by using a LED and a LDR.
Project tutorial by Saad Saif
DIY light based transmission between two Arduinos using LED and LDR with custom communication protocol.
Project tutorial by saadsaif0333
LED indicators to show Dark or Light Level
Project tutorial by SetNFix
let's build a vu meter using arduino
Project tutorial by edison science corner
Turn on and off the lamp using IR sensor, change lamp color and brightness with button and potentiometer.
Project tutorial by smellai and smellai
Control a Neopixel band with an HC-05 Bluetooth module.
Project tutorial by Rad Silviu
A cool timer gadget to teach your kids about washing hands for twenty seconds.
Because LED are fun - but addressable rocks. :)
Project tutorial by Tal O
Its a RGB led controlling using a Processing IDE visualizer. As we move the cursor from visualizer the color of RGB led will change.
Project tutorial by alaspuresujay
Use an Android device to control the color of a NeoPixel via a Bluetooth connection.
Project tutorial by Bryce K and Lucas W
The short project for beginners to get some practice in using LED lighting with the sound sensor.
Project tutorial by Mantas Utka
Got a KY-016? Stick it straight onto your UNO and start attracting unicorns! No soldering. No schematics. No freaking Fritzing.
Project tutorial by Johan_Ha
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Project tutorial by Arnov Sharma
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
Project tutorial by Miranda Hansen and Joshua
I soldered SMD LED directly to wire and made them into THT LED, then used an Arduino to fade them.
An ATtiny-based tiny USB lamp that can be turned on/off by knocking, clapping, blowing, finger snapping and shouting.
Project tutorial by Amal Mathew
Take a poor preforming flashlight and add great modifications to it in half an hour.
Project tutorial by Englishscone
Build a proximity sensor using aluminium foil and a high value resistor.
A super-fast and super-bright flashing LED light, perfect for growing plants (and you can record the temperature too)!
Project tutorial by pipparichter
I used to have a strong wish to be a hacker in my early years.But I never found a way to be one of those legends.
Project tutorial by Frankie
Just a basic sound sensor activated LEDs with an optional LCD for sound level data. ***STROBE LIGHT EFFECT AT AROUND 8:45 MINUTE MARK!***
Project tutorial by HeathenHacks
Use an addressable LED strip to keep your plant under control.
Project tutorial by sakuragi93
Or connect with your social account:
New here? Create an account