A nice looking analog style LED POV clock.

Simple device to control and initialize DALI lamps.

Use Arduino to run a spectacular Christmas light show. (Both in English and Spanish, en Ingles y Español.)

Multiple Clock Faces Multiple Settings via Rotary Encoder CHECK MY OTHER VU PROJECTS. And Builds. www.wannaduino.com

Here We are going to make a light cube which will change color accordingly with surrounding sounds. This work is featured in Hackspace mag

A freeform circuit sculpture of a snowflake. Driven by an Arduino Nano using 18 software PWM pins.

Low-cost outdoor lights with DMX control.

An Arduino powered Stranger Things light wall costume that can be controlled via Bluetooth serial connection to a cell phone.

Build a 3D printed Lunar Phase Clock for your desk or nightstand.

Create a cool fire simulation effect with Wi-Fi wireless control. An Android app is also ready to play with your creation!

The solar lamp is charged during the day, and they started to pass. Suitable for yards and corridors.

An Arduino logo engraved in acrylic with a touch sensitive aluminum LED stand.

An IoT lamp with gesture seonsor, temperature sensor, and multiple light effects.

Everybody here loves binary clocks. So do I, so I made one for myself.

Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.

Control an RGB LED strip with an Arduino Nano.

Use an LED strip with a custom Arduino Nano controller to control a strip of WS812 LEDs.

I made two NeoPixel sabers controlled by Arduino, with plumbing part hilts that look nice, and animated party modes.

An Arduino controlled glowing orb LED lamp with IR remote control.

This infinity mirror with individual programmable LEDs loops through 20 light effects, guards your room in the dark and plays a memory game.

This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.

Want to customise your skateboard or electric skateboard with programmable RGB LEDs?! I've done it! And here's how...

Luminous ball, with clock and thermometer, controlled by Blynk.

The circuit was printed with the Electrifi conductive filament in 15 min. All 64 WS2812b SMD LEDs were attached to the circuits in 20 min.