This project combines the WS2812B RGB LED matrix and PIR motion sensor to greet visitors with a text.
Project tutorial by HeathenHacks
This project detects changes in temperature based on your specifications, and then changes the color of a LED to the color of your choosing.
Receive the signal and control an LED.
Project showcase by Nicholas_N
A cheap DIY version of Nanoleaf RGB LIGHT with ATtiny85 and WS2812 RGB strip.
Project tutorial by Arnov Sharma
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
Create digital dice in 15 minutes!
Project showcase by SKYMDev
Translate music to a dazzling light show with this customizable light controller project. Great for DJs, parties, and 1:1 shows!
Project tutorial by Joshua and Miranda Hansen
A fun, interactive project for makers new to Arduino. Control the brightness of an RGB LED with Potentiometers, with on/off switch built in.
Project tutorial by FIELDING
I used to have a strong wish to be a hacker in my early years.But I never found a way to be one of those legends.
Project tutorial by Frankie
A simple Advent Candle controlled by Arduino (various light effects and also plays "Jingle Bells" upon button press)
Project tutorial by Maurizio Manetti
Blinking LEDs with Arduino and some buttons.
Project tutorial by Super Kid
Make a simple but challenging badge with an LED matrix display and an ATtiny13!
Project tutorial by FabLabAQ
Set up your Arduino and Raspberry PI to control lighting and animation on an RGB led strip via AWS IoT and Alexa voice commands.
Project tutorial by Bruno Portaluri
In this tutorial we're going to play with a gesture sensor and a NeoPixel ring to learn how to combine them both using an Arduino.
Project tutorial by danionescu
My first go at dead bug style soldering. A style of soldering where no PCB is used and all of the components are soldered together.
Project tutorial by wrightmac
This is a simple IR sensor block detector for model railroads. It controls three lights: red, yellow and green.
Project in progress by lecurtis
I have hacked into the Christmas LED strips and start controlling it using Arduino and 1Sheeld Voice Recognition.
Project tutorial by ahmed ismail
This project will show you how to use an RGB LED.
A very basic intro into some very cool LEDs!
by Dante Roumega
Using LEDs as Binary No. and 2 button switches to add or subtract 1 point per push.
by Team P.O.I.N.T.
LED emergency lights for use on model / toy vehicles and other projects. Uses Arduino UNO and GY-WS2812B-8 RGB LED Module from DIYmall.
Project tutorial by bigboystoys13
For those LED's a leg short of three.
Project tutorial by Mr_Glenn
Riding bike is a little dangerous. With the direction indicators for a bike, cars know if you want to turn right or left. Make biking safe!
Project tutorial by Rosaliew
NeoPixel's are awesome you can control hundreds, thousands, millions of lights with 3 wires (pwr, signal, gnd). Let's learn how to use them!
by Austin Detzel
Or connect with your social account:
New here? Create an account