A fun, colourful RGB LED matrix with a twist!
Project showcase by Unexpected Maker
This project shows the integration of hardware with mobile application. The user can control equipment from his phone over the internet.
Project showcase by Kaustubh Agarwal
Christmas is near!
Project showcase by Alexander
It's a Morse code receiver base on processing the light signals.
Project showcase by Alireza Karkon
The TrafficLight is a project that has Arduino-powered LEDs Blinking like a traffic light.
Project showcase by Advaith Jagathesan
A "Magic Cauldron" that detects spell casting and responds with dynamic lighting effects.
Project showcase by Ian McKay
Traffic lights system for a two-street crossing with pedestrian lights, controlled by Arduino.
Project showcase by lmsousa
Arduino Gemma and Neopixel LEDs to give some life to my 3D Printed Princess Hilda Staff: Zelda Link Between Worlds.
Project showcase by Amie D.D.
An Arduino powered Stranger Things light wall costume that can be controlled via Bluetooth serial connection to a cell phone.
Project showcase by Michael Barretta
Receive the signal and control an LED.
Project showcase by Nicholas_N
An Arduino controlled glowing orb LED lamp with IR remote control.
Project showcase by Peter Wallhead
Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.
Project showcase by Sam
Create your Larson (Cylon or Kit Car) Scanner, controlled by BLE with the Arduino 101, made with Hackster Box
Project showcase by Gustavo Reynaga
Control 8 x 8 (64) LEDs using two 74HC595 shift registers as fast as possible using SPI and PORT access. (Updated 19 Jan, 2019)
Project showcase by Jegqamas
Using the power of a winning idea, an MKR1000, and a TLC5940 to add RGB lighting to my workspace.
Project showcase by Keith Mitchell
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri B
In this project I made a Morse code transmitter using Arduino and Winform application.
This is a wooden Christmas tree I made, using LEDs for the star at the top and the garland on the tree.
Project showcase by Arduino_Jarod
A light source and show... without buttons!
Project showcase by MicroBob
An Ardiuno project using NeoPixels to create slowly changing christmas light pictures in my window.
Project showcase by ElBanquo
Interactive RGB lamp. Made with pupils. We use syringes to change color.
Project showcase by Njegomir Skola
A simple Christmas tree with 9 LEDs (+ 1 extra from Arduino board).
Project showcase by FLORICA Tudor-Nicusor
Flashlight controller, 3 LED (White, Red, Green), 6 modes + and charging with solar panel. Consummation Power Off is < 1mAmp.
Project showcase by Chrisroy
Just like the full size houses, only smaller! Has 31 EL wires and LEDs synced to music using an Arduino and Vixenlights.
Project showcase by robowarner
Or connect with your social account:
New here? Create an account