8 light, rear of vehicle traffic advisor controller, with 4 modes and 14 patterns.

A simple project trying out animations on a matrix of 5 NeoPixel rings.

Wooden Christmas tree decoration, with led rows representing string lights of a Christmas tree and a star on top of it.

A fun, colourful RGB LED matrix with a twist!

A freeform circuit sculpture of a snowflake. Driven by an Arduino Nano using 18 software PWM pins.

This is a wooden Christmas tree I made, using LEDs for the star at the top and the garland on the tree.

An Arduino controlled glowing orb LED lamp with IR remote control.

Everybody here loves binary clocks. So do I, so I made one for myself.

Arduino controlled auxiliary saddle bag lights for a motorcycle.

Customised solar-powered & sensor-controlled guard lights to brighten up my apartment balcony that somehow does not have any lights fitted.

Coming MOTHER'S DAY. Do you have any gift idea? If your answer is " NO," do you want to give to her a gift?

It's a Morse code receiver base on processing the light signals.

An Arduino logo engraved in acrylic with a touch sensitive aluminum LED stand.

Flashlight controller, 3 LED (White, Red, Green), 6 modes + and charging with solar panel. Consummation Power Off is < 1mAmp.

Show spooky messages (inspired by the Stranger Things Ouija board) using a pan and tilt servo controlled by a BASIC program.

Arduino Nano bike bag signals, controlled by a wireless (RF) RC attached to front handle.

A system to check if a remote broadcast system has connection with the studio (and shows us when we are on air).

More LED strips everywhere.

Valentine week is almost here; it's a perfect time to build something for your special one and what else could be better than blinking LEDs?

Christmas is near!

A simple Christmas tree with 9 LEDs (+ 1 extra from Arduino board).

An Arduino powered Stranger Things light wall costume that can be controlled via Bluetooth serial connection to a cell phone.

The circuit was printed with the Electrifi conductive filament in 15 min. All 64 WS2812b SMD LEDs were attached to the circuits in 20 min.