Turn on and off the lamp using IR sensor, change lamp color and brightness with button and potentiometer.
Project tutorial by smellai and omaric
LED cube 4x4x4, 64 LED diode, 16 forms of work.
Project showcase by MakerRobotics
The LED sequencer is an easy project for beginners to learn how LEDs work.
Project tutorial by thefantasticode.Group
Using Teensy (small Arduino) to power NeoPixels off of an electric skateboard battery.
Project tutorial by Ben Schwartz
Ten-year old nephews are particularly impressed when they can change the colour of the outdoor Christmas lights from a tablet.
Project tutorial by UlyssesandBloom
Uses a photo resistor to determine whether a room is bright, average or dark. It shows this using 3 LEDs and/or the serial monitor.
Project tutorial by DCamino
Do you know of the famous WS1012 LEDs? The PL9823 is the cheapest LED that uses the same protocol of the WS1012. Let's blink LEDs!
Project tutorial by Giovanni Gentile
A simple, original and cheap Christmas tree made with LED-illuminated plastic straws that can be controlled over WiFi.
Project showcase by Auri B
Measure humidity and temperature levels in your home to avoid unhealthy air quality with this fun project.
Project showcase by KatjaNiggl
First experience with Neopixel.
by Ingo Lohs
Using one byte to hold all the color data for a single RGB LED.
Project showcase by Jason Cowin
Luminous ball, with clock and thermometer, controlled by Blynk.
Project tutorial by Tittiamo
Create your own code red button for use in simulation scenarios. Flashing LEDs and button!
Project tutorial by David Escobar
Or connect with your social account:
New here? Create an account