The second project draws to a close.
Project showcase by Eric Chen
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
Adjust the speed of your car!
Project tutorial by Super Kid
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
Project tutorial by Arnov Sharma
Ever want to control your RC car with an airplane remote? Here's how!
Project showcase by Gkid19
Trunk Robotic arm is a art in modern robotics. It can able to spin and work like artistic.
Project tutorial by jegatheesan
Building a RC controlled Pololu (3Pi), using a couple of TX/RX 433Mhz modules and a Joystick.
Project tutorial by Marco
This ball mill was made for grinding sand and cleaning objects like rusty bolts.
Project showcase by tinkersprojects
We have created a car controlled by claps with Arduino. It also stops when it impacts with something.
Project showcase by Clara & Jone
We designed a car that was able to sense objects and turn to avoid them.
Project showcase by Team Fabrizzio and Casey's Robot Cars
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
This lesson, aims to show how to to control a servo using virtual buttons on an interface created by the Anniken Andee Shield!
Project tutorial by Arduino_Scuola
Mr. Big is a large mobile unit that can carry weight up to 8kg.
Project tutorial by mishrarahul1997
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
A Simple IoT Car!
Project tutorial by P3RISH
The ball and beam system is a popular textbook example in control theory and nonlinear dynamics.
Project tutorial by 3 developers
Make an R2-D2 replica and control it by an app you programmed. Add a Nokia interface which gives you the Star Wars characters info.
Project tutorial by Kutluhan Aktar
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
BLYNK app based remote used to control a bot.
A sundial type clock with stepper motors and lasers to show hour and minute.
Project in progress by Mr_Xu
Throttle by wire design utilizing a pedal assist circuit remotely controlled by a smartphone.
Project in progress by Stephen Sizensky
Or connect with your social account:
New here? Create an account