Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
This car is designed to be controlled by voice commands.
Project tutorial by Yug_Ajmera
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
Project tutorial by Andriy Baranov
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.
Project tutorial by Benjamin Gray
A homemade CNC machine for cutting PCBs.
Project tutorial by Rui Fernando Caldas
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
What about using a Wi-Fi remote-controlled robot for exploring your surroundings, reaching inaccessible places, spying and take pictures?
Project tutorial by Igor Fonseca Albuquerque
Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.
Project showcase by Michele
Control an Arduino robot with a smartphone using ESP8266.
In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.
Project tutorial by Mark Tashiro
Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.
Project tutorial by KittenBot
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
Android app control Arduino RC car via bluetooth.
Project tutorial by RAFI RASHEED T C
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
The Sienci Mill One is a powerful, open source desktop CNC machine to turn your digital 3D designs into real physical objects.
Project tutorial by Sienci Labs
KureBasArm is a robotic arm that can movable from mobile phone manually or by sensors from your phone. You can record and play your movement
Project tutorial by KureBas Robotics
MeArm mounted on smart robot car controlled by 2 Arduino UNOs
Project showcase by benoitdr
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
Basically A Car which is controlled by 2 Modes: Accelerometer Sensor of the phone, and Autonomous (Moves in path and avoids object)
Project tutorial by Muhammad Anas
Or connect with your social account:
New here? Create an account