The making of a large 3D printer (400x400x400 mm) for a college project.

With a lot of inspiration from Boston Dynamics projects, I'm trying to make something great without million dollars.

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!

An Arduino-controlled delta robot built with fischertechnik: fast and precise pick and place robot.

Aria is a voice-activated robotic helper for my mom.

A low-cost off-road 6WD autonomous robot using Arduino! This self driving car drove for over 2 miles on a bike trail on its own!

This is a simple and highly configurable CNC machine found at vicious1.com. It's perfect for a DIY hobbyist.

LQ control of Ball and Plate system controlled by Arduino MEGA 2560.

Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.

Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

Intel Edison expands a new 3-D printer market.

If you do not struggle solving 'Towers of Hanoi' just build your own Arduino-powered 3-axis-robot.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.

This project includes the design of a control system to control a three phase AC motor of a service elevator using an Arduino Mega 2560.

Robot arms are awesome! In this tutorial we explore how to control one of them using a Nunchuk and an Arduino Mega.

KureBas V2.0 has manual mode and obstacle avoiding mode. He has a gripper, WiFi camera and new application that's produced for him.

A fully autonomous robot lawn mower.

It can give you a controlling device that can helps you to build an underwater robot communicating via Ethernet cable.

A pen plotter adapted with a brush to paint in oil.

A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

This project uses Embrio to program an autonomous wall avoiding robot car without writing a single line of code!

This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).