The making of a large 3D printer (400x400x400 mm) for a college project.

It uses a 3D printed arm from free resources with my code to recognise the human moves and control the arm

Use an openmv camera, 6-axis arm, and mecanum chassis to build your auto arm robot!

This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.

Build your own e-bike controller and add the behaviors and features you want.

Ever looked to the skies and wondered what it would be like to roam across the stars, look here to create your own 3d-printed drone!!!

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

This is a Robot that can play football.

This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).

This is a Simulink model to control a robotic arm using gestures that are captured using Kinect; robotic arm developed using servo motors.

A spider-like robot based on Arduino.

Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor

DIY powered skateboard controlled using Smartphone over Bluetooth communication with Arduino.

A fully autonomous robot lawn mower. www.repalmakershop.com

Robot wirth stepper motor via microstepping, digital motion processing, auto tuning, cascaded PID controller and now with Joy Stick Control.

Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.

A basic robot using Arduino.

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

Make an Arduino-powered robot which is controlled by Bluetooth.

SimAr stands for Semi-Intelligent Multifunctional Robot SimAr is a humanoid robot which is designed to unleash the secrets Of the robotic.

This bot was built to demonstrate conversation, gesturing, combined with an ability to move around in a crowd using 12 sonars.

It's a low-cost and handmade robot with the mission to be attractive to the clients from businesses and help with the rate of services.

LQ control of Ball and Plate system controlled by Arduino MEGA 2560.

The idea is to create a functional Droideka from Star Wars, or at least something as close to it as possible!