We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.

Tired of controlling your robot with a joystick? Ever thought of controlling it with your hands?

"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.

This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.

"Rex, the Robot" will try finding how to scape from a "labyrinth" on the shortest and fastest way.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

It's a basic 4-wheel drive car which can be controlled by Android phones.

The making of a large 3D printer (400x400x400 mm) for a college project.

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

Line Follower Robot with PID control, using an Android device to easily setup the main control parameters for better and fast loop tuning.

Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.

How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

Create an Arduino 101 bot controlled by Johnny Five over Firmata BLE!

On this sample I would like to explain why PID-control should be used for speed controls and how the direction can be inverted.

The tank that will follow you and serve you beer. Coolness is over 9000!

Cool robot that follows black line. Learn and make a line follower robot with PID controller in 2 hours.