CORTEX is a robotic arm controller software written in python which employs both forward & inverse kinematics to control 3DOF robotic arms.
Project in progress by Team CORTEX Robotics
Antwerp is the testbed for a robotic control software framework I'm marketing named The Robby Framework
Project in progress by Lee Phillips
Ever looked to the skies and wondered what it would be like to roam across the stars, look here to create your own 3d-printed drone!!!
Project in progress by Team DIY Drone
Make this robot moves by just moving your hand!
Project in progress by abdelkader_ch
Driving DVD motor using an arduino UNO and motor shield
Project in progress by ramjipatel376
I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.
Project in progress by Michael Rechtin
Real-time artwork based on collected data.
Project in progress by Iva Jerabkova
ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.
Project in progress by i_mozy
A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").
Project in progress by srolf
Robotic arm controlled by bluetooth controller.
Project in progress by Basso&Delmoro&Gramaglia
This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.
Project in progress by mikesoniat
An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.
Project in progress by Ankel2000
WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.
Project in progress by RobinB
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
The objective of this project is to control the ROBONOVA-1 and make a few steps whith it.
Project in progress by micho94
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
Project in progress by ihacklab
An open source kit to build a walking smart robot dinosaur.
Project in progress by Jacquin Buchanan
This device uses 4 servo-driven wheels to slide forwards, backwards, left, right, and turn. Currently under serial or Bluetooth control.
Project in progress by Jeremy Cook
Forward and Inverse Kinematics Library for Delta robot.
Project in progress by tinkersprojects
I have designed and built a prototype of an underwater robot with ARM technology AI. For the monitoring, cartography and data collection.
Project in progress by Gabriel Alejandro Giraldo Santiago
Arduino robot with GoPro camera and FPV function controlled from iPhone via Bluetooth or obstacle avoidance with ultrasonic sensor.
Project in progress by AlxArd
Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.
Project in progress by maboshi
Meet the little black rover that can do many things in your house without bumping into a single thing!
Project in progress by Cole Purtzer
This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.
Project in progress by Fablab_Irbid
Or connect with your social account:
New here? Create an account