A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

A laser-cut robot kitten that runs and learns from you.

An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

Polar drawing machine built with fischertechnik and Arduino. Thanks to a G-code interpreter, it can draw any bitmap or vector graphics.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

Make a simple and programmable servo arm out of readily available materials!

"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...

It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.

The tank that will follow you and serve you beer. Coolness is over 9000!

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

A wearable robotic owl familiar. Archimedes judges your emotions, via Google AIY.

[Title]

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

KureBasArm is a robotic arm that can movable from mobile phone manually or by sensors from your phone. You can record and play your movement

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

An all parts included kit to build a walking smart robot dinosaur.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

The making of a large 3D printer (400x400x400 mm) for a college project.

A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.

Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.

Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......