iRobbie is the revolutionary app that brings smartphone power to your Arduino project.

NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.

How to use a Servo.

Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.

Detect obstacles through ultrasonic sensors and then avoid them.

This robot took part in a competition and solved the maze.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.

Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!

This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.

Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.

If you do not struggle solving 'Towers of Hanoi' just build your own Arduino-powered 3-axis-robot.

Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.

In this project, I will show you how to make a low cost and high power motor driver using relays, NPN transistors and resisters.

Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.

Use voice to make it go forward, back, left and right. The arm can move up, down, left, right. Also, the height of the arm can be altered.

Control an Arduino robot with Twitter and the OneSheeld.