Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.

A quick tutorial on how the use the L298N Motor Controller with DC motors

In this article we discuss about how to Servo motor interface with Arduino Uno

A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

Sound sensing, navigation, and obstacle detector.

A robotic tower crane made out of Lego Technic, Arduino boards, 3D printed parts, off-the-shelf DC gear motors, and addressable RGB LEDs.

NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.

Give the axis of an inkjet printer a new job.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.

Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.

How to use a Servo.

This is a miniature robot arm combined with a weighing system that can be used to move objects while knowing the weight of the object.

Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.

In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors

Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.

Build a line follower using an LM324N with a backup Arduino Nano.

Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...

This is a project about a SCARA arm which is controlled by a joystick and which sends the position by a Bluetooth module.

Using an Arduino MKR and L298N H-bridge to drive a NEMA 17 stepper.