This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

An attempt to achieve: 1. Shifter LEDs with RPM display 2. Manual gearbox sensing and display 3. CAN bus values forwarding to RaceChrono.

A firefighter Arduino autonomous robot which is capable of detecting, approaching and extinguishing fire.

I took a normal lawn tractor and added some motors, actuators, and electronics to make it remote-controlled.

Robotic arm controlled by bluetooth controller.

Real-time artwork based on collected data.

Calculates the position of the sun relative to the trackers position on the earth and points the array at the sun.

ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.

Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.

A simple Arduino/ESP32 crawler with PS4 BT remote control, but with 2x MCU and an advanced CAN-based communication ("drive-by-wire").

Forward and Inverse Kinematics Library for Delta robot.

This project introduces a functional extruder at a reasonable price, which can be affordable to the fablab community and others.

Say Alexa the move, it is automated using the xy plotter that we have made especially for Chess.

This robot uses 4 Sharp IR sensors to wander around the house and avoid running into things.

An open source kit to build a walking smart robot dinosaur.

Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.

Relatively cheap CNC plotter, that is directly controlled with G-code via own CAM software in PC. This is part of my graduation project.

WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.

A simple and cheap three wheeled time waster for almost any skill level. Basic stats are Arduino Mini Pro, Sonic distance, and a Gyro.

"Robô da Alegria" is a project to help the interaction with kids in children's hospitals.

A line follower with a arm and A extension trally with arduino uno R3

Most 6DoF robotic arms come with a control board with RS-232 for desktop control, we adapt the control for use with android devices simply.

This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.