Zakhar is a robotics UX project. The main aim is to decrease the anxiety of users interacting with a robot.
Project in progress by Andrei Gramakov
Developed over 4 years and 14,000 miles for enviolo (NuVinci) CVT hubs using reed switches and excepts power data for fully auto shifting.
Project in progress by erose
WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.
Project in progress by RobinB
The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!
Project in progress by Cole Purtzer
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
An open source kit to build a walking smart robot dinosaur.
Project in progress by Jacquin Buchanan
This device uses 4 servo-driven wheels to slide forwards, backwards, left, right, and turn. Currently under serial or Bluetooth control.
Project in progress by Jeremy Cook
Meet the little black rover that can do many things in your house without bumping into a single thing!
Let's Test Hc-12 Bluetooth module that have 1.8 km range.
Project in progress by KureBas Robotics
Manual and temperature controlled PC chassis fans.
Project in progress by Deep_Sky
A robotic arm which can pick an object from any random location.
Project in progress by Md. Khairul Alam
The Otto builder community requested, and here we are developing the best printed circuit board for Otto or any biped robot.
Project in progress by Otto PCB
Time on the edge.
Project in progress by ekaggrat
Arduino/Intel Edison project with a stroboscope and motor controller. This setup can easily be used to create film sculptures.
Project in progress by Harlen Bains
Or connect with your social account:
New here? Create an account