Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.
Project showcase by DemetrisEng
An Arduino Rc Car but it has LCD i2c for sending messages and debugging.
Project showcase by DABOD
A robot which is controlled by an HC-05 module and receives commands using a Bluetooth terminal app.
Project showcase by Chandran N
A line follower bot which can detect gas leaks and high temperature in a typical household and raise an alarm.
Project showcase by HomeSafety
A mini hovercraft able to detect and follow a black line and carry a 1/2 lb payload.
Project showcase by Miles Nash
A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.
Project showcase by Nick Romeo
This project involves extracting an EMG signal from two muscles of right hand and controlling a robotic arm based on the hand movements.
Project showcase by Shivanshu Pandey
How to make a remote-controlled origami robot with Arduino.
Project showcase by isangmu
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
This is a cute linear stage that's about the size of a business card.
Project showcase by noboyu
Navibot is a guidance system that helps visitors or patients navigate their way in any new building.
Project showcase by 3 developers
Manual and programmable robotic arm with fancy control panel.
Project showcase by NerdFatherRJ
It is about a delta robot that can grab and move objects. It is connected to a Raspberry Pi to play Tic Tac Toe using computer vision.
Project showcase by geordag
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
This is a general purpose 3D-printed linear servo actuator (pusher style). Hope these save you some time on a future project!
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Project showcase by Arnov Sharma
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
Remotely operated ground vehicle for sensing the toxic gases which is helpful for firefighters and researchers.
Project showcase by EWU Makers
Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).
Project showcase by joechen
A miniature three degrees of freedom robotic arm that you can even record the movement and loop it!
Project showcase by Ooi_Yan_Liang
A 3D-printed brain-controlled prosthetic arm.
Project showcase by Ayush Kapur
ETG is an autonomous RC car that utilizes a RPi 3 and Arduino to localize itself in the environment and avoid colliding into other bots.
Project showcase by dantuluri
Or connect with your social account:
New here? Create an account