NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.

A simple way to control a motor with a potentiometer and an Arduino.

Balancing robot, balance the robot using wheel and imu 6axis Sensor with BluBug & Android.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

Detect obstacles through ultrasonic sensors and then avoid them.

This robot took part in a competition and solved the maze.

In this arduino project, We use a temperature sensor LM35, to control the speed of the Servo motor.

Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.

What you need to control the motors of your robot? H-Bridge is the magic word!

In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.

This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

Use a USB serial connection and our Desktop App to control the LittleArm Arduino robot arm.

In this project, I will show you how to make a low cost and high power motor driver using relays, NPN transistors and resisters.

Make your own robot, will make this part of our project Arduino controlled Hexbug Spider Arduino-based control system with turning control.

Give your MeArm robot the basic functionality of a real industrial robot.

Enjoy teaching your kids basic electronics and as a reward get them a unique Toy.

Use voice to make it go forward, back, left and right. The arm can move up, down, left, right. Also, the height of the arm can be altered.