There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.

A quick tutorial on how the use the L298N Motor Controller with DC motors

A simple way to control a motor with a potentiometer and an Arduino.

In this article we discuss about how to Servo motor interface with Arduino Uno

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.

Sound sensing, navigation, and obstacle detector.

NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.

Give the axis of an inkjet printer a new job.

Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.

Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.

In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,

In this arduino project, We use a temperature sensor LM35, to control the speed of the Servo motor.

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.

Interface board capable of communicating an Arduino board or any microcontroller to the Dynamixel motors.

Arduino UNO, Display, EasyDriver, Stepper Motor, Etc...

This is a project about a SCARA arm which is controlled by a joystick and which sends the position by a Bluetooth module.

Arduino UNO-based, two-axis linear slider with centering function and Bluetooth remote control from an Android app.

It is the next generation of remote control cars where signal attenuation is completely out of the picture.

In this project, I will show you how to make a low cost and high power motor driver using relays, NPN transistors and resisters.