A robotic arm that can be wirelessly controlled with a glove that contains IMU and flex sensors.

The FlySky joystick is adopted to control the speed and limitations of the ramp of two stepper motors

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

A two-wheeled, Arduino-based robot that rolls around.

A laser-cut robot kitten that runs and learns from you.

Use three stepper motors to make the classic analog clock movement in the opposite direction.

Line following robot with RFID sensor for supplying materials and automating workflow - cheap and open source. Inspired by industrial robots

A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

This interesting project will cover all things required for the ultimate goal of building a mobile remote surveillance camera.

A 3D printed, battery powered box that includes an Arduino, an OLED display and a rotary encoder is used to control a motorized turntable.

AVR ATmega32A MCU based, DC Motors speed/position/timing controller/testing board for Stepper, Servo, Gear motors and programmable too.

A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.

Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.

Device that manages the USB camera microscope: Make easy focus with DVD stepper motor and light the object with different colors and intens.

A simple and cheap three wheeled time waster for almost any skill level. Basic stats are Arduino Mini Pro, Sonic distance, and a Gyro.

Line followers follow lines, right? But what if you put some LEDs on top and use long exposure? Well, you get this!

Make a program for the Arduino Pro Mini in Visual Studio to control motor speed with PID which can archive it exactly.

Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.

I hacked the Breville One-Touch Tea Maker to play music from Star Wars. It plays when the tea basket moves down and when it moves back up.