We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...
Project tutorial by Team Otto builders
It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
The making of a large 3D printer (400x400x400 mm) for a college project.
Project tutorial by Desi Engineer
KureBasArm is a robotic arm that can movable from mobile phone manually or by sensors from your phone. You can record and play your movement
Project tutorial by KureBas Robotics
The tank that will follow you and serve you beer. Coolness is over 9000!
Project tutorial by Balázs Simon
This project shows how to control a 6DOF robot arm via web.
Project tutorial by phpoc_man
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by RobotGeek Projects Team
Robot arm and its controller.
Project tutorial by HomeMadeGarbage
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
We will try to make a simple CNC machine with you.
Project tutorial by TheTNR
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
Want a cool spider-like robot to wear around and impress your friends? Well, this is the bot for you!
Project tutorial by Jorvon Moss
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.
Project tutorial by Ron Dagdag
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
An amazing off-road robot with 4-wheel drive.
Project tutorial by Jithin Sanal
This project shows you how to build a cheap and easy, but very small CNC(Plotter) using Arduino UNO.
Project tutorial by Zain Shahwar
Meet Walbi, a 2:1 scale humanoid with Arduino programs for motion capture and playback. Move it by hand, record and then play it back.
Project tutorial by The Inner Geek
Here is a step by step guide to making a "crawler robot."
Project tutorial by MEGA DAS
Entertain humans and pets alike with paper planes launched by your voice.
Project tutorial by Jonathan Morales Vélez
Or connect with your social account:
New here? Create an account