We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

A laser-cut robot kitten that runs and learns from you.

Polar drawing machine built with fischertechnik and Arduino. Thanks to a G-code interpreter, it can draw any bitmap or vector graphics.

The tank that will follow you and serve you beer. Coolness is over 9000!

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.

A wearable robotic owl familiar. Archimedes judges your emotions, via Google AIY.

Robot that drives around autonomously in greenhouse environment and identifies diseases.

A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.

An Autonomous Delivery System using the DonkeyCar which allows you to send or receive physical items, in a number of different scenarios.

Wolf is an IoT multi-terrain robot running on the Arduino 101 platform.

A 3D-printed brain-controlled prosthetic arm.

Let’s ship them all!

Solder your PCBs using a DIY robotic arm.

Use the concepts in light painting to create a machine that can recreate bitmaps with a long-exposure camera using a single LED.

The terrain vehicle which is managed with raspberry pi, arduino and controlled via android software.

Use PHP and MySQL to control a machine that will retrieve parts so you no longer have to dig for that 330 ohm resistor!

Jrobot Delivery is ready to deliver your next pizza!