This project, known as Biotronics, was conceptualized to create synthetic species that look alive or with life and make them conscious.
Project in progress by ihacklab
This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.
Project tutorial by 5 developers
We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
A laser-cut robot kitten that runs and learns from you.
Project showcase by Rongzhong Li (李荣仲)
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.
Project tutorial by Sandeep Sharma
Polar drawing machine built with fischertechnik and Arduino. Thanks to a G-code interpreter, it can draw any bitmap or vector graphics.
Project showcase by David
An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html
Project tutorial by AhmedAzouz
Calculates the position of the sun relative to the trackers position on the earth and points the array at the sun.
Project in progress by Team Trouble
A wearable robotic owl familiar. Archimedes judges your emotions, via Google AIY.
by Alex Glow
Jrobot Delivery is ready to deliver your next pizza!
Project showcase by joechen
Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.
Project showcase by Michele
A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.
This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.
Project tutorial by Amit Nandi (BigWiz)
This robotic arm can be controlled with computer mouse or it can make decisions by itself with Matlab vision system.
Project showcase by Konrad Witt
Solder your PCBs using a DIY robotic arm.
Robot that drives around autonomously in greenhouse environment and identifies diseases.
A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.
Project tutorial by StaffanEk
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.
Project tutorial by adamsstephen
The terrain vehicle which is managed with raspberry pi, arduino and controlled via android software.
Project tutorial by Volkan Sarıoğlu
The tank that will follow you and serve you beer. Coolness is over 9000!
Project tutorial by Balázs Simon
A human-sized semi-humanoid robot that looks like Sauron from The Lord of the Rings movie series.
Project tutorial by Mahmoud Ahmed
Or connect with your social account:
New here? Create an account