We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

We will try to make a simple CNC machine with you.

Arduino UNO-compatible robotic simulation of the C. elegans nematode.

Mobile-controlled CNC plotter.

Robot that drives around autonomously in greenhouse environment and identifies diseases.

An automatic DIY photography turntable for all the techie photographers out there.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).

A version of the RC Car that uses Remote Arduino to allow a Windows device to control the motors without using an external motor shield.

This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.

The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.

A 3D-printed brain-controlled prosthetic arm.

Let’s ship them all!

A 2-in-1 CNC machine with both a rotary tool and a laser module.

Solder your PCBs using a DIY robotic arm.

Use PHP and MySQL to control a machine that will retrieve parts so you no longer have to dig for that 330 ohm resistor!

Jrobot Delivery is ready to deliver your next pizza!

A 3D printed robotic arm, controlled through an Arduino, also being 3D rendered in Python OpenGL, using the Ci20 board.

Python does the image processing, Arduino controls the servos.

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.