A robot for children which helps to play and reduce addiction of smartphone.

We will try to make a simple Triple CNC machine with you and so different others...

We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

MeArm mounted on smart robot car controlled by 2 Arduino UNOs

We will try to make a simple CNC machine with you.

It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......

This a mini CNC 2D plotter made from old DVD drive, L293D motor shield & Arduino.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

Calculates the position of the sun relative to the trackers position on the earth and points the array at the sun.

Robot that drives around autonomously in greenhouse environment and identifies diseases.

The Recon droid will detect the rebel scum and report back to the Empire. Control movement through Bluetooth or Wi-Fi.

Caravaggio is a drawing machine able to replicate a digital image using a pen and a continuous line.

Jrobot Self Drive (episode 3 of Jrobot series) is a self-driving footpath traveler based on machine learning (Keras and TensorFlow Lite).

Jrobot Delivery is ready to deliver your next pizza!

This robotic arm can be controlled with computer mouse or it can make decisions by itself with Matlab vision system.

Solder your PCBs using a DIY robotic arm.

Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.

An Alexa controlled robot that can perform tasks autonomously. It can feed your fish or program it to perform pick and place operations.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.

Make a simple robotic arm which has master - slave control, and can record and play the moves.

Arduino UNO-compatible robotic simulation of the C. elegans nematode.

Mobile-controlled CNC plotter.