An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

Make a simple and programmable servo arm out of readily available materials!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

Design of an indicative featured and speed controlled obstacle avoiding robot.

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

It's a basic 4-wheel drive car which can be controlled by Android phones.

A quick tutorial on how the use the L298N Motor Controller with DC motors

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

Detect obstacles through ultrasonic sensors and then avoid them.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.

[Old - updating soon] - In this project, you can learn how to control servo motor using serial monitor.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.

Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!

This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.