An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

Full procedure with theory explaining the concept behind a line follower robot

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.

Design of an indicative featured and speed controlled obstacle avoiding robot.

You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.

In this project, you can learn how to control servo motor using serial monitor.

This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.

It's a basic 4-wheel drive car which can be controlled by Android phones.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.

Connect 2 Stepper Motors to Arduino and control them with Joystick - Quick and Easy!

GRBL and CNCJS Tutorial

An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.

Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.

Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.

This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.

This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.

Ultimate getting started guide to easily understand how stepper motor work and how to properly control using an Arduino board

Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.

This project will show you how to make a laser turret.