A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.
by Infineon Team
Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.
by Shubham Shinganapure
Give the axis of an inkjet printer a new job.
by Ingo Lohs
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
In this article we discuss about how to Servo motor interface with Arduino Uno
by Akshay Joseph
Build a line follower using an LM324N with a backup Arduino Nano.
by Ajaya Dahal
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
by Team platinum
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.
Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.
by Tiago Alves
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.
by Alex Glow
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!
by Boian Mitov
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
How to use a Servo.
Or connect with your social account:
New here? Create an account