You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
With this project, you can remotely control your car with Bluetooth.
Project tutorial by Mehmet SARI
MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.
Project tutorial by utilstudio
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
A walking insect looking thing made from leftovers.
Project tutorial by Jeremie
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.
Project tutorial by Johnathan Hottell
This is a project that will show you how to create a Wi-Fi controlled RC Car that will recharge wirelessly while it is parked.
Project tutorial by Ioannis Kydonis
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Robot arms are awesome! In this tutorial we explore how to control one of them using a Nunchuk and an Arduino Mega.
Project tutorial by Igor Fonseca Albuquerque
It's a basic 4-wheel drive car which can be controlled by Android phones.
Project tutorial by Yogeshmodi
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.
Project tutorial by Garry Gerwer and Ahmed Hamdy
An easy method to control the stepper motor driven EEZYBOT MK2 robotic arm using a CNC shield and an Arduino Uno.
Project tutorial by Samira Peiris
The electronics for a simple camera slider, keeping it simple so it can be used with an ATTiny85.
Project tutorial by Ian Cumming
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
Project tutorial by Scott Beasley
Very basic obstacle avoidance robot that I used to introduce my 9 yo nephew and 7 yo niece to robotics...
Use three stepper motors to make the classic analog clock movement in the opposite direction.
Project tutorial by scott mangiacotti
Build Absolute, Incremental, and Quadrature Encoders
Project tutorial by SciJoy
Design and testing of WormGear Mechanism Fitted over servo motor.
Project tutorial by Brijesh Singh
Or connect with your social account:
New here? Create an account