You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by DIY GUY Chris
Here is a step by step guide to making a "crawler robot."
Feeling lonely in your DJ practices? This animatronic moves the head to the beat.
Project showcase by Roni Bandini
A robot that moves based on the hand gestures
Project tutorial by Harish K and Ashwin S
Today I will show you how to make eating robot with Arduino Nano. This project I made for my daughter. It's very easy with cheap materials.
Project tutorial by GoldScrew
4 wheel steering rear servo controlled by throttle forward percentage and steering width plus directional blinking led.
Project tutorial by wrighi
Make your own walking humanoid robot out of Lego and 3D printed parts powered by Arduino Nano, off-the-shelf DC gear-motor and NeoPixel LED.
Project tutorial by Tart Robotics
Hang your robot from a zipline across the hall. Then, control your robot by clapping using an Arduino and a microphone sensor.
A simple laser engraving machine for fun and first steps in CNC.
Project showcase by tsar_
The LittleArm 2C is a 3D printed, Bluetooth-controlled, Arduino robot arm designed for STEM
Project tutorial by Slant Concepts
This is a low cost robot that will help students in better learning and understanding.
Project showcase by utk6533
Ultimate getting started guide to easily understand how stepper motor work and how to properly control using an Arduino board
Project tutorial by 3 developers
We established this project in order to perform some robotics skills. PICTO92 is a mobile line-follower robot.
In this project, we've made a car tuning for a RC Porsche using Arduino including an Android app to make car driving easier.
A self-controlled robot with specific dimensions and features. It is also designed in hostile shapes which qualify it to fight.
Project tutorial by AhmedAzouz
Use an Ultrasonic sensor to control the vertical height of the LittleArm.
Project showcase by Slant Concepts
Build a line follower using an LM324N with a backup Arduino Nano.
by Ajaya Dahal
5in1 educational Arduino-compatible set I made for my nieces
Project tutorial by bzqp
Cute little DIY project using 8x8 LED matrix module and nRF24L01.
Project tutorial by Hung-Che
I have a little paint booth in my shop, so I created a device to shake paint cans for me.
Project tutorial by MakrToolbox
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
PV panel simulation for tracking solar movement.
Project tutorial by Fikret
The Critter is a simple Arduino walking robot that is fully 3D printed.
A very simple clock made with 2 Arduino nanos and two stepper motors.
Project showcase by garysat
Or connect with your social account:
New here? Create an account