This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Make a simple and programmable servo arm out of readily available materials!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

Learn how to control Lego motors and servos with your Arduino and build your own Android app to remote control your model.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

It's a basic 4-wheel drive car which can be controlled by Android phones.

Design of an Indicative Featured and Speed Controlled Obstacle Avoiding Robot.

Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).

Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.

A flat pack, open source, robot arm, that you can build with nothing but a screwdriver and enthusiasm.

Detect obstacles through ultrasonic sensors and then avoid them.

A simple way to control a motor with a potentiometer and an Arduino.

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

Control an Arduino robot with a smartphone using ESP8266.

This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!

This tutorial guides you through using 1Sheeld, Arduino and an Android phone to make an RC robot car at a glance.

we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick

A super simple stair climbing robot.