A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2
by Ingo Lohs
There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons
by Boian Mitov
A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.
by Dimitris Platis
In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.
Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.
The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.
In this article we discuss about how to Servo motor interface with Arduino Uno
by Akshay Joseph
This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.
by Team RobotGeek Projects Team
In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.
This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.
by Team platinum
Detect obstacles through ultrasonic sensors and then avoid them.
by Ishaq Yang
The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.
by Muhammad Anas
Use a USB serial connection and our Desktop App to control the LittleArm Arduino robot arm.
by Slant Concepts
Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.
by Tiago Alves
arduino bluetooth vehicle (final designed chassis)h
by Andres Duarte
Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.
by Shubham Shinganapure
In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,
What you need to control the motors of your robot? H-Bridge is the magic word!
Give the axis of an inkjet printer a new job.
Here is a guest project, where I take you through a Wokwi embedded systems Simulator project - an example of controlling 5 Servo motors
by Hack star
Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.
by Infineon Team
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by RobotGeek Projects Team
Or connect with your social account:
New here? Create an account