This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.

Make a simple and programmable servo arm out of readily available materials!

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.

Design of an indicative featured and speed controlled obstacle avoiding robot.

A simple way to control a motor with a potentiometer and an Arduino.

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!

It's a BLDC motor based jet turbine.

A super simple stair climbing robot.

Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

[Old - updating soon] - In this project, you can learn how to control servo motor using serial monitor.

Control an Arduino robot with a smartphone using ESP8266.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

we performed the control of the stepper motor in the forward and backward directions along the x axis with the joystick

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors