A quick tutorial on how the use the L298N Motor Controller with DC motors

A simple way to control a motor with a potentiometer and an Arduino.

In this article we discuss about how to Servo motor interface with Arduino Uno

In this tutorial, you will learn how to drive DC, stepper and servo motors using an Arduino L293D motor driver shield.

There are a lot of tutorials, on how to control Servos with joysticks, or analog sensors, but sometimes we need to control them with buttons

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

Give the axis of an inkjet printer a new job.

Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.

Detect obstacles through ultrasonic sensors and then avoid them.

This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

In this writeup, I'm going to tell you, how you can make a simple mimicking robotic arm using Arduino and Servo motors,

Interface board capable of communicating an Arduino board or any microcontroller to the Dynamixel motors.

What you need to control the motors of your robot? H-Bridge is the magic word!

Are you looking for a board, that can be used to control strong DC motors as well as highspeed brushless motors? Here you've found it.

arduino bluetooth vehicle (final designed chassis)h

Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.

Use a USB serial connection and our Desktop App to control the LittleArm Arduino robot arm.

In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.