We are going to talk about how to Make Internet or Wi-Fi Controller Car Using Esp8266. this can be easily controlled by your smartphone.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.

In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.

Design of an indicative featured and speed controlled obstacle avoiding robot.

Open hardware/software test bench for solar tracker with virtual instrumentation.

This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors

A robotic arm made from easily available materials that can record and replay positions.

Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.

Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...

In this project, you can learn how to control servo motor using serial monitor.

A super simple stair climbing robot.

Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!

Hello world! I made a 1 servo control app yesterday and I said that I would make a multi control, so here is the multi control app!

Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.

It's a BLDC motor based jet turbine.

Objective of the Swarm-bots project is to study controlling the bot so assemble themselves, avoid obstacle and synchronization between bots.

In this project we will connect a Wii nunchuk to an Arduino and control pan/tilt servos.

Build your own line following robot (line follower) step by step easily by following this tutorial

Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.

This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick.

With this project, you can remotely control your car with Bluetooth.

It's a basic 4-wheel drive car which can be controlled by Android phones.

Avoid conflict with other libraries, use ServoTimer2 and run servo motors with ease.