Build your own line following robot (line follower) step by step easily by following this tutorial
Project tutorial by lightthedreams
Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.
Project tutorial by kelvineyeone
Uses 2 analog joysticks to control 4 servos without of using additional board. Have 3 modes: manual, recording of coordinates and autorun.
Project tutorial by utilstudio
Open hardware/software test bench for solar tracker with virtual instrumentation.
Project tutorial by Saad Motahhir and Aboubakr_El Hammoumi
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
This project makes use of the preciseness of a laser beam, just one IR sensor and that good old arduino board to measure the RPM of motors.
Project tutorial by yashastronomy
This the Bluetooth controlled car that used HC-05 Bluetooth module to communicate with mobile.
Project tutorial by Vishal soni
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
Learn how to make a simple line follower robot by using Arduino and very basic electronic components. It is a fully autonomous robot.
Project tutorial by Shubham Shinganapure
A robot that moves based on the hand gestures
Project tutorial by Harish K and Ashwin S
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Awesome gesture controlled robot tutorial using Arduino and PAJ7620 sensor.
Project tutorial by Jithin Sanal
Control a DC motor's speed and direction via Bluetooth through a mobile app.
Project tutorial by eliott3005
This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick.
Project tutorial by BEASTIDREES62
Full procedure with theory explaining the concept behind a line follower robot
Project tutorial by Saher Iqbal
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
CNC machine control with GRBL breakout board for Arduino Uno.
Project tutorial by Team CNC Design
A robotic arm made from easily available materials that can record and replay positions.
Project tutorial by Ryan Chan
A simple obstacle avoidance robot using an IR distance sensor with an IMU.
Project tutorial by andr9e
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Maverick
An electronic sun-dancing sun tracker.
Project tutorial by SURYATEJA
Let's disassemble one RC toy car, racking its main parts, replacing the original embedded electronics by an Arduino.
Project tutorial by MJRoBot
You will learn how to make a servo move with an ir remote control and the degree measurement you will see on the lcd display!
Project tutorial by razangry1731
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Or connect with your social account:
New here? Create an account