This project is all about "How to build a arduino robot". this arduino robot called Otto robot.
This is my first Arduino-based, Bluetooth-controlled RC car. It is controlled by a smart phone application.
Project in progress by Saman Fernando
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
Make a simple and programmable servo arm out of readily available materials!
Project showcase by Ryan Chan
Here is a step by step guide to making a "crawler robot."
Project tutorial by DIY GUY Chris
Use Serial Monitor to test TB6600 Stepper Motor Driver and stepper motor
Project in progress by ashleyblack
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
This is a beginner's guide to making your first Arduino robot. Smart phone controlled, wall follower and obstacle avoiding robot.
Project tutorial by Muhammed Azhar
An Arduino controlled car that avoids obstacles (ie. walls or objects in front of it).
Project showcase by Adam
In this tutorial, I'll show you how to use a wireless PlayStation 2 (PS2) controller and an Arduino Uno pilot a robotic tank.
Project tutorial by Igor Fonseca Albuquerque
Design of an indicative featured and speed controlled obstacle avoiding robot.
Project tutorial by Team Maverick
Let's start with the basics! 2wd obstacle avoiding robot using arduino uno.
Project showcase by HDA Robotics
A simple way to control a motor with a potentiometer and an Arduino.
by Benjamin Larralde
A quick tutorial on how the use the L298N Motor Controller with DC motors
by Ryan Chan
My first project in Arduino platform. I combined two features in this project, Bluetooth control mode and obstacle avoiding mode.
Project showcase by KureBas Robotics
Its super simple, low cost (2 sensor based) line follower robot. If you are a absolute beginner, you can make it only in 2 hours.
Project tutorial by Zubayer Al Billal Khan
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
A basic robot using Arduino.
Project tutorial by Renga
How to use a Servo.
Two ways to control the camera cradle, you can put a flashlight, laser, ToF modules...
Project tutorial by SurtrTech
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
The Critter is a simple Arduino walking robot that is fully 3D printed.
Project showcase by Slant Concepts
Create a robot car, which will be controlled from a smartphone using the G-Sensor. Use the RemoteXY service to create GUI and source code!
Project tutorial by Evgeny Shemanuev
In this project, you can learn how to control servo motor using serial monitor.
Project tutorial by Kub_Luk
Or connect with your social account:
New here? Create an account