The making of a large 3D printer (400x400x400 mm) for a college project.

This is a simple and highly configurable CNC machine found at vicious1.com. It's perfect for a DIY hobbyist.

Step aside, an amazing six-wheel off-road robot coming through! Check out this Arduino-based wireless surveillance DIY RC robot.

Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.

Creating a GPS-controlled, camera-equipped RC boat with an Arduino Mega and 433 MHz remote.

KureBas V2.0 has manual mode and obstacle avoiding mode. He has a gripper, WiFi camera and new application that's produced for him.

This is a low cost robotic arm with 6 axis that you can build with analog servo motors. (I personally used digital servos from hitec).

If you do not struggle solving 'Towers of Hanoi' just build your own Arduino-powered 3-axis-robot.

How to make a radio-controlled submarine with a video camera

Control a robotic arm using a Bluetooth HC-05 module and Arduino via an Android app.

A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.

A pen plotter adapted with a brush to paint in oil.

A spider-like robot based on Arduino.

A Service Oriented Architecture to keep your robots source code organized and scalable as they grow, iteration after iteration.

A recyclebot, AKA a waste plastic extruder, capable of making commercial quality 3D printing filament.

DIY powered skateboard controlled using Smartphone over Bluetooth communication with Arduino.

This is a Simulink model to control a robotic arm using gestures that are captured using Kinect; robotic arm developed using servo motors.

You can remotely control your car with Bluetooth. Four settings are available: manual, automatic, steering and vocal control.

We wanted to combine the mobility of a tracked rover with the versatility of a robotic arm into a single device that reminds an EOD bot.

ATM is an Arduino based split flap display which aims to give users a satisfying tarot card reading experience.

Forward and Inverse Kinematics Library for Delta robot.

Unlike others, we have mounted our ultrasonic sensor on a servo.

Update of the PENXZYL 3.0 project, with a new base and modified head and brush. Drawing a SATOR square. #TENET

It is controlled by an Arduino Mega 2560 and connected to Raspberry PI via WiFi using ESP8266. It is also able to run independently.