Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.

An Arduino Rc Car but it has LCD i2c for sending messages and debugging.

A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.

A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.

Moves chess pieces around the board invisibly and seemingly magically.

How to make a remote-controlled origami robot with Arduino.

A mini CNC machine made out of cheap materials with a stunning result.

Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.

A miniature three degrees of freedom robotic arm that you can even record the movement and loop it!

It is about a robotic arm of 3dof + 1 controlled by arduino and visual basic that plays tic tac toe game against a human player.

A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.

A low cost turntable for photogrammetry acquisitions. Used by Department of Biology at University of Pisa to acquire 3D models of bones.

A PID controlled line follower robot, named Elliot.

Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.

Building a "waldo" training pendant for the Arduino LittleArm.

LittleArm is a 3D printed trainable Arduino robot arm for STEM students and makers.

For my thesis, I have developed the control system and end-effector for a robot, easily implementable and economic.

A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!

A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.

Remote controlled Car designed to navigate a course and lift a small amount of weight.

Exploring for methane, for water and the temperature on the surface of an unknown planet.

Manual and programmable robotic arm with fancy control panel.

The second project draws to a close.

This is a 3D-Printed hand that is controlled by servos and flex sensors.