A mini CNC machine made out of cheap materials with a stunning result.
Project showcase by Mr-M
Solar tracking photovoltaic (dual axis) that follows the sun, using LDR sensors and two DC motors.
Project showcase by DemetrisEng
A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.
Project showcase by Nick Romeo
A PID controlled line follower robot, named Elliot.
Project showcase by SMM2
A robotic hand that emulate the movement of your hand wirelessly through a glove with sensors.
Project showcase by Gabry295
A robot that has ultrasonic sensors mounted on a basic servo to detect obstacles, swerve around them, and continue on a random path!
Project showcase by Xavier Tan
An Arduino Rc Car but it has LCD i2c for sending messages and debugging.
Project showcase by DABOD
Chunchunmaru is an Arduino UNO-based robot which can carry heavy loads (100kg-200kg) from one location to another.
Project showcase by Arnov Sharma
A mini CNC 2D plotter made from old DVD drive and L293D motor shield. Very cheap but interesting. It can draw any image uploaded from PC.
Project showcase by Mrinnovative
Moves chess pieces around the board invisibly and seemingly magically.
Project showcase by Michael Guerero
How to make a remote-controlled origami robot with Arduino.
Project showcase by isangmu
Slider for medium camera, with programmable speed and paths.
Project showcase by Guiye Perez Bongiovanni
Code for driving a BLDC motor and adjusting its speed using a pot. This photo shows wires to a slipring in the hollow shaft of a BLDC motor.
Project showcase by mbarraus
Navibot is a guidance system that helps visitors or patients navigate their way in any new building.
Project showcase by 3 developers
Manual and programmable robotic arm with fancy control panel.
Project showcase by NerdFatherRJ
Building a "waldo" training pendant for the Arduino LittleArm.
Project showcase by Slant Concepts
I am designing and building an MSE (Mouse) Droid from Star Wars, which will have a hidden payload.
Project showcase by potentprintables
A hand gesture-controlled car made from scrap DVD player. Hand gestures detected by gyro and Arduino-driven motor.
Project showcase by ashish_8284
Exploring for methane, for water and the temperature on the surface of an unknown planet.
Project showcase by B.E.A.S.T.-7th Senior High School of Trikala, Greece
LittleArm is a 3D printed trainable Arduino robot arm for STEM students and makers.
A miniature three degrees of freedom robotic arm that you can even record the movement and loop it!
Project showcase by Ooi_Yan_Liang
For my thesis, I have developed the control system and end-effector for a robot, easily implementable and economic.
Project showcase by PowerBerry
A low cost turntable for photogrammetry acquisitions. Used by Department of Biology at University of Pisa to acquire 3D models of bones.
Project showcase by alfiosky4
Line follower made of infrared, photodiode and ultrasonic sensors readout for the tea pack has go down, processing by Arduino.
Project showcase by Sistem Komputer STMIK-AUB Surakarta
Or connect with your social account:
New here? Create an account