This is the basic model of the SMARS robot taken from the Thingiverse.
Project tutorial by Mirko Pavleski
Gyro control in robots to hold direction
Project tutorial by Imalwaysontheinternet
We have created a car controlled by claps with Arduino. It also stops when it impacts with something.
Project showcase by Clara & Jone
This is a project I built from an item I found on Instructables author nipon4666 that I tweaked to correct an issue with high speed motors
Project tutorial by comptek4
A simple obstacle avoiding robot with 3D-printed and salvaged parts.
Project tutorial by Arnov Sharma
Adjust the speed of your car!
Project tutorial by Super Kid
Ever want to control your RC car with an airplane remote? Here's how!
Project showcase by Gkid19
Overcoming the one servo restriction and replacing switches, jumpers and potentiometers with software controlled variables.
by Kevin Gagnon
This lesson, aims to show how to to control a servo using virtual buttons on an interface created by the Anniken Andee Shield!
Project tutorial by Arduino_Scuola
Mr. Big is a large mobile unit that can carry weight up to 8kg.
Project tutorial by mishrarahul1997
Make an R2-D2 replica and control it by an app you programmed. Add a Nokia interface which gives you the Star Wars characters info.
Project tutorial by Kutluhan Aktar
The simplest Arduino-based drawing car ever.
Project tutorial by Jonathan Morales Vélez
In this guide, we will be adding Infrared Remote Control to a RobotGeek Geekbot.
by Team RobotGeek Projects Team
We designed a car that was able to sense objects and turn to avoid them.
Project showcase by Team Fabrizzio and Casey's Robot Cars
The ball and beam system is a popular textbook example in control theory and nonlinear dynamics.
Project tutorial by 3 developers
This project uses the capabilities of the gen4-uLCD-43DT to collaborate with diverse platforms such as Arduino and HC-05 Bluetooth Module.
Project tutorial by 4D Makers
Low-cost, 3D-printed motorized turntables that feature swappable magnetic top plates.
Project showcase by potentprintables
A Simple IoT Car!
Project tutorial by P3RISH
BLYNK app based remote used to control a bot.
This tutorial will present a simple way to control directions of robot with two potentiometers and several wires.
by Pierre Ruffy & Roxane Alexandre
Throttle by wire design utilizing a pedal assist circuit remotely controlled by a smartphone.
Project in progress by Stephen Sizensky
This project shows us how we control a "Micro Robot Car" and using a RF Remote Control with "Infineon 3D Magnetic Sensor 2Go".
Project tutorial by Guillermo Guillen
A sundial type clock with stepper motors and lasers to show hour and minute.
Project in progress by Mr_Xu
This lesson aims to show how an H bridge works.
Or connect with your social account:
New here? Create an account