We use an Arduino to build an autonomous "follow me" cooler that connects to a smartphone via Bluetooth and uses GPS to navigate.
Project tutorial by Hacker Shack
An interactive robot that anyone can make! Otto is very easy to 3D print and assemble, walks, dances, makes sounds and avoids obstacles.
Project tutorial by Camilo Parra Palacio
It can sketch accurately, you just have to upload the gcode of the image. Try it it's just awesome.
Project tutorial by Yogeshmodi
"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...
Project tutorial by Team Otto builders
High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!
Project tutorial by Fredrik Stridsman
This project shows how to design a wi-fi remotely controlled two-wheeled robotic rover, using an Arduino Uno and an ESP8266.
Project tutorial by Igor Fonseca Albuquerque
It is an Arduino, Customised GRBL, CoreXY, Servo and Stepper based CNC Drawbot that is Open Source and Open Hardware. It can draw or .......
Project tutorial by Arnab Kumar Das
"Rex, the Robot" will try finding how to scape from a "labyrinth" on the shortest and fastest way.
Project tutorial by MJRoBot
This tutorial will show you how to control servo motor using Arduino Nano and an easy to use Servo motor driver.
Project tutorial by Jithin Sanal
It's a basic 4-wheel drive car which can be controlled by Android phones.
In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!
Project tutorial by circuito.io team
Follow the sun with Arduino! In this tutorial, we'll be building an Arduino based Solar Tracking Turret.
Project tutorial by Team RobotGeek Projects Team
Line Follower Robot with PID control, using an Android device to easily setup the main control parameters for better and fast loop tuning.
Simple robot to build, involve no pcb or proto board, no frames, just using a lot of glues.
Project tutorial by Martedi
Create an Arduino 101 bot controlled by Johnny Five over Firmata BLE!
Project tutorial by 5 developers
The tank that will follow you and serve you beer. Coolness is over 9000!
Project tutorial by Balázs Simon
On this sample I would like to explain why PID-control should be used for speed controls and how the direction can be inverted.
Project tutorial by tolgadurudogan
How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).
Project tutorial by Andriy Baranov
The making of a large 3D printer (400x400x400 mm) for a college project.
Project tutorial by Desi Engineer
What about using a Wi-Fi remote-controlled robot for exploring your surroundings, reaching inaccessible places, spying and take pictures?
Let's develop step by step a project for controlling and programming a robotic arm, simulating the basic functions of an industrial robot.
A walking four legged robot "mammal style." 3DOF legs, IR receiver all connected to a Pro Mini. Material cost less than $100.
Project tutorial by StaffanEk
Make a fully-functioning CNC machine that can accept different tools for less than $150 by using parts from DFRobot and Banggood.
Project tutorial by Arduino “having11” Guy
All my servos are a little bit different to each other - I've built a rig to measure what PWM values turn my servos to a specific angle.
Project tutorial by Jeremy Lindsay
Or connect with your social account:
New here? Create an account