NodeMCU ESP8266 in access point mode: the simplest way to make Wi-Fi controlled Robot Car from Bluetooth Arduino Robot Car + Android App.

Here's an introduction to control a Nema 17 stepper motor with the help of the Adafruit TB6612 OR A4988 Stepstick OR PHPoC PES-2405 R2

A quick tutorial on how the use the L298N Motor Controller with DC motors

This robot took part in a competition and solved the maze.

A versatile & easy to use vehicle platform for hobby-grade projects: You focus on application logic and the library takes care of the rest.

Your powerful friend, the transistor can control high-voltage motors and lights from a microcontroller pin.

Disassemble an old printer (in this case a dot matrix) and drive the stepper motor(s) for linear motion or rotation. With Arduino.

In this article, you will learn how to control DC, Stepper, and servo motors by Arduino and L293D.

The older members among you can still remember DVD-ROM drives well: let's take another look at the inner values of a past technology.

If you do not struggle solving 'Towers of Hanoi' just build your own Arduino-powered 3-axis-robot.

This Arduino Linear Actuator Tutorial shows how to do basic manual control of a large linear actuator using an Arduino and two buttons.

Autonomously functioning farmbot integrating IoT, image processing, automation, and Android application.

In this article we discuss about how to Servo motor interface with Arduino Uno

Connect Stepper Motor to Arduino and control it with Rotary Encoder - Quick and Easy!

This project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

The force resistive sensor outputs the applied force to the Arduino, and we move the servo according to the amount of force.

iRobbie is the revolutionary app that brings smartphone power to your Arduino project.

Detect obstacles through ultrasonic sensors and then avoid them.

Want to be cool like Simone Giertz but don't know where to start? The InterbotiX Arm Link Software provides a simple interface for Arduino.

A DC motor starter using 600 V CoolMOS™ C7 Gold superjunction MOSFETs for industrial applications.

Created to be a whole Robot controller that uses the Arduino Hardware in general, for a while. This looks to improve the code way.

Hello all, I hope you are doing good and safe. I'm here with another very cool project which you can build using some scrap/ used parts.

Use voice to make it go forward, back, left and right. The arm can move up, down, left, right. Also, the height of the arm can be altered.

In this project, I will show you how to make a low cost and high power motor driver using relays, NPN transistors and resisters.