A laser-cut robot kitten that runs and learns from you.

A Bluetooth-controlled robot car.

In this tutorial we’ll show you how to build a simple and cheap robotic arm from wood scraps and plastic bottles!

Diversity Adaptive Obstacle Avoiding Robot

"Otto DIY with steroids" + Bluetooth + APP + switch + touch sensors + strength + sound detection...

This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.

Very basic obstacle avoidance robot that I used to introduce my 9 yo nephew and 7 yo niece to robotics...

Navibot is a guidance system that helps visitors or patients navigate their way in any new building.

This is a lower limb exoskeleton developed to aid patients with walking disabilities in their therapies and to perform simple tasks.

Meet Walbi, a 2:1 scale humanoid with Arduino programs for motion capture and playback. Move it by hand, record and then play it back.

Control the speed of brushless DC motor using Arduino and Bluetooth module (HC-05).

Have you ever wanted to use a PocketBeagle? And build a remote car? Well, I have! Here is how you can too!

A programmable and highly maneuverable robotic cat for STEM education and AI-enhanced services.

Manual and programmable robotic arm with fancy control panel.

Make a simple and programmable servo arm out of readily available materials!

High accuracy wall plotting at minimal cost, enrich all the whiteboards around you with surprising artwork!

Meet Bert, a bipedal walking monster robot.

A basic model train layout containing a passing siding with a train running around and stopping in an automated sequence.

MeArm robot with using board MeArm v1.6.1 with recording of movemens and with infrared remote controller possibility.

A Service Oriented Architecture to keep your robots source code organized and scalable as they grow, iteration after iteration.

Use computer vision to control a Nerf gun, aim, and fire, all on its own!

Building a "waldo" training pendant for the Arduino LittleArm.

This is 3-axis CNC plotter/engraver based on GRBL software and 2020 aluminum extrusions. Low-cost engraving and PCB manufacturing dual side.

A simple rover for line following made exploiting the ARTe Arduino REal-Time eXtension.