Meet the little black rover that can do many things in your house without bumping into a single thing!
Project in progress by UniverseRobotics
An open source kit to build a walking smart robot dinosaur.
Project in progress by Jacquin Buchanan
A robotic arm which can pick an object from any random location.
Project in progress by Md. Khairul Alam
Time on the edge.
Project in progress by ekaggrat
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
Project in progress by Mihai Oltean
This device uses 4 servo-driven wheels to slide forwards, backwards, left, right, and turn. Currently under serial or Bluetooth control.
Project in progress by Jeremy S. Cook
WORK IN PROGRESS. Scriba is a printing robot which uses cameras to correct its trajectory and alignment.
Project in progress by RobinB
The Xenon controls itself to not by fins but by moving the motor at the bottom back and forth!
Let's Test Hc-12 Bluetooth module that have 1.8 km range.
Project in progress by KureBas Robotics
The Otto builder community requested, and here we are developing the best printed circuit board for Otto or any biped robot.
Project in progress by Team Otto PCB
Developed over 4 years and 14,000 miles for enviolo (NuVinci) CVT hubs using reed switches and excepts power data for fully auto shifting.
Project in progress by erose
Arduino/Intel Edison project with a stroboscope and motor controller. This setup can easily be used to create film sculptures.
Project in progress by Harlen Bains
Manual and temperature controlled PC chassis fans.
Project in progress by Deep_Sky
Or connect with your social account:
New here? Create an account