Make your own quadruped robot with Arduino, 3D-printed, and Lego-compatible parts.
Project tutorial by Tart Robotics
Closed loop universal motor control system using PID algorithm.
Project tutorial by Saulius Bandzevičius
Easy implementation of Rev-limiter for Automotive or Motorcycle Engine.
Project tutorial by adrianos_botis
Introducing MARK 1, the programmable Arduino Robot Arm. But, that's not all, this Robot Arm can be controlled by Hand Gestures. Here's How..
Project tutorial by Eben Kouao
Make a Virtual Assistant AI Robot for Computer Automation and Little Chit Chat.
Project tutorial by ashraf_minhaj
I'll show you how to make a 2-Wheel Bluetooth Controlled Car based on an Arduino Nano.
Project tutorial by Nikolaos Babetas
A robot that moves based on the hand gestures
Project tutorial by Harish K and Ashwin S
This research was conducted focusing on the necessity of robots in our daily life.
Project showcase by Md Amirul Islam
Let's take a break during navigation while Autopilot follows the route, control it with remote control!
Project tutorial by marcozonca
A robotic tower crane made out of Lego Technic, Arduino boards, 3D printed parts, off-the-shelf DC gear motors, and addressable RGB LEDs.
by Tart Robotics
Control toys like a superhero. A DIY video for how to make gesture-controlled car.
Project tutorial by Shubham Shinganapure
Today I will show you how to make eating robot with Arduino Nano. This project I made for my daughter. It's very easy with cheap materials.
Project tutorial by GoldScrew
4 wheel steering rear servo controlled by throttle forward percentage and steering width plus directional blinking led.
Project tutorial by wrighi
Version 1 of my design for an RC Car using an Arduino Nano and a Seeeduino XIAO. I call this RC_Car_RP.
Project tutorial by devinnamaky
Make your own walking humanoid robot out of Lego and 3D printed parts powered by Arduino Nano, off-the-shelf DC gear-motor and NeoPixel LED.
Feeling lonely in your DJ practices? This animatronic moves the head to the beat.
Project showcase by Roni Bandini
This is my second line follower robot (Version 4). Unlike the previous one, I have made the design of the printed circuit (Chassis).
Project tutorial by drakerdg
This project uses mobile phone to communicate with a robot via bluetooth. It also senses obstacles and stops to avoid collision.
Project tutorial by alokmech007
Hang your robot from a zipline across the hall. Then, control your robot by clapping using an Arduino and a microphone sensor.
An Android-control(BT) system is added in a motor toy boat and it can go any direction slowly.
Project showcase by joeydream
You want to make a machine that could hold a pen and draw you a picture! than this is the best tutorial to guide you making it.
Project tutorial by MEGA DAS
Make a teleoperated rescue robot out of Lego Technic, Arduino boards, off-the-shelf DC and servo motors, and NRF communication modules.
Tangible Coding provides an opportunity for kids to become involved in programming with no screen used.
A try to simulate the automation of modern manufacturing technologies specially the robotic arms that used in all fields of manufacturing.
Project tutorial by AhmedAzouz
Or connect with your social account:
New here? Create an account