Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.

Create an Arduino 101 bot controlled by Johnny Five over Firmata BLE!

Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.

Wolf is an IoT multi-terrain robot running on the Arduino 101 platform.

Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.

Build and control a simple robot arm from anywhere in the world!

A voice controlled, arduino101 based mobile robot.

A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.

Augmenting the Arduino101 BLE Rover with sensors for autonomous driving.

The terrain vehicle which is managed with raspberry pi, arduino and controlled via android software.

This project demo how to build a self-balancing robot with Arduino 101.

This is first version of my low cost 3d printed robot arm based on Ikea Tertial lamp.

This robot will avoid any obstacle that comes in its way and it's very easy to make.

Arduino 101 rover project using Mecanum wheels and Blynk.

This project features a 4 motor robot rover controlled with a BLYNK virtual Joystick over a Low Energy Bluetooth (BLE) connection.

An interactive and engaging 5 day event having kids building Robots using mBot. Some powered by Arduino 101 boards & MikroElektronik relay

Converting a rover to use the Arduino 101 including the Bluetooth Low Energy (BLE) radio and 6-axis Inertial Measurement Unit (IMU).

Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.

Meet Bert, a bipedal walking monster robot.

Recently I received an Arduino 101 kit from Hackster. My joy was great because it had a lot to do new projects!

I couldn't find an existing BLE Remote Control for an Arduino 101 Rover - this is my novel solution!

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

Teaches you how to use the Stepper motor and driver in the Arduino Grove Starter Kit.

50 people and 6 robots sumo at IoT meetup.