Using PixyCam and Intel Arduino 101 to drive this rover. Easy Robotic Vision system using PixyCam, rover reacts to the ball using Pan/Tilt.

Able to point in a specific direction or turn by degrees, this motor is a staple in home automation and robotics.

Create an Arduino 101 bot controlled by Johnny Five over Firmata BLE!

Build and control a simple robot arm from anywhere in the world!

Intel Arduino 101-based tank using Bluetooth Low Energy to communicate with a Blynk remote control on your phone.

A robot that can climb long vertical poles to clean/paint them, or for security, surveillance or military purposes by attaching a camera.

Augmenting the Arduino101 BLE Rover with sensors for autonomous driving.

A voice controlled, arduino101 based mobile robot.

This project features a 4 motor robot rover controlled with a BLYNK virtual Joystick over a Low Energy Bluetooth (BLE) connection.

The terrain vehicle which is managed with raspberry pi, arduino and controlled via android software.

This project demo how to build a self-balancing robot with Arduino 101.

This robot will avoid any obstacle that comes in its way and it's very easy to make.

This is first version of my low cost 3d printed robot arm based on Ikea Tertial lamp.

Arduino 101 rover project using Mecanum wheels and Blynk.

Converting a rover to use the Arduino 101 including the Bluetooth Low Energy (BLE) radio and 6-axis Inertial Measurement Unit (IMU).

I couldn't find an existing BLE Remote Control for an Arduino 101 Rover - this is my novel solution!

Getting Started Guide for using Blynk with the Arduino IDE for controlling a small robot chassis using a Bluetooth phone or tablet.

Converting a common RC car to a Bluetooth car, using an Arduino 101 & controlling with a smartphone via Blynk app.

Recently I received an Arduino 101 kit from Hackster. My joy was great because it had a lot to do new projects!

An interactive and engaging 5 day event having kids building Robots using mBot. Some powered by Arduino 101 boards & MikroElektronik relay

Meet Bert, a bipedal walking monster robot.

This project shows you how to successfully control a robot arm using the L9110 motor board, without using up all your Arduino outputs.

50 people and 6 robots sumo at IoT meetup.

A robot arm that can be used to grab small objects.