Make a simple and programmable servo arm out of readily available materials!

Design of an indicative featured and speed controlled obstacle avoiding robot.

In this article we discuss about how to Servo motor interface with Arduino Uno

Easy to use code to measure PWM signals (<2.5Khz) plus a dedicated function to calibrate the input from an RC receiver, including fail-safe.

Open hardware/software test bench for solar tracker with virtual instrumentation.

A quick tutorial on how the use the L298N Motor Controller with DC motors

Custom button powered via Arduino controls aftermarket exhaust flaps!

A simple interface for a homemade (or commercial) antenna rotator. Manual command or USB via computer tracking software - EasyComm protocol

Moves chess pieces around the board invisibly and seemingly magically.

A servo-driven lead screw using Arduino to calculate proper spindle and lead screw speeds for cutting English and metric threads with VFD.

This project shows how you can build a car which can be controlled by your smartphone using an android application via Bluetooth.

How to make an Arduino 4WD RC Car with Joystick Controller (Arduino Uno | Joystick Shield | nRF24L01+PA+LNA).

CNC machine control with GRBL breakout board for Arduino Uno.

An electronic sun-dancing sun tracker.

I made this RC car with an Arduino Uno, which I control via an HC-05 Bluetooth module. The project is now in its initial state.

This is my next project, a smartphone-controlled Arduino 4WD robot car or Bluetooth Arduino robot.

Control the speed of your PWM fan easily. No need for other circuits.

An automatic DIY photography turntable for all the techie photographers out there.

How To Make a Stepper Motor Speed Controller using Arduino and L298 Motor Driver

This is the basic model of the SMARS robot taken from the Thingiverse.

A different view towards hydraulic system. This is a hydraulic system which is punched with electronics.

Python does the image processing, Arduino controls the servos.

An unmanned ground vehicle, compatible with multi micro control. [OSHW] SA000001 | Certified open source hardware | oshwa.org/sa000001.html

Build your own line following robot (line follower) step by step easily by following this tutorial